Warmer Tunnels
Tunnel sort heat transfer system that uses cheap tunnel sort heat to heat the bottles to temperature. The bottles will then be tagged and packed straight off. This unit uses an easy steam coil that’s immersed in water tanks’ piping. This reduces energy consumption.
|
PROCESS – TUNNELS |
|||
|
NO. |
MODEL |
DESCRIPTION |
BPM |
|
1 |
CT-30/60/72 |
COOLING TUNNEL (30/60/72 INCH WIDTH CHAIN |
30-1000 |
|
2 |
CT-84/96/114 |
COOLING TUNNEL (84/96/114 INCH WIDTH CHAIN |
|
|
3 |
CT-120/138/150 |
COOLING TUNNEL (120/114/150 INCH WIDTH CHAIN |
|
|
4 |
WM-30/60/72 |
WARMER TUNNEL (30/60/72 INCH WIDTH CHAIN |
30-1000 |
|
5 |
WM-84/96/114 |
WARMER TUNNEL (84/96/114 INCH WIDTH CHAIN |
|
|
6 |
WM-120/138/150 |
WARMER TUNNEL (120/114/150 INCH WIDTH CHAIN |
|
|
7 |
PAS-30/60/72 |
PATEURIZER TUNNEL (30/60/72 INCH WIDTH CHAIN |
30-1000 |
|
8 |
PAS-120/138/150 |
PASTEURIZER TUNNEL (120/114/150 INCH WIDTH CHAIN |
|
|
9 |
PAS-120/138/150 |
PASTEURIZER TUNNEL (120/114/150 INCH WIDTH CHAIN |
|
Warmer Tunnel
The Warmer tunnel is often accustomed to heat cold bottles from 2/3°C to a temperature of 28-30°C. . You’ll be able to realize a lot of data here.
Cooler Tunnel
Cooling tunnels square measure accustomed cool hot bottles. They’ll be heated from temperature (28-30 degrees) up to 90/95 degrees. It’s accustomed to fill hot crammed bottles with juices.
Pasteurizer Tunnel
Pasteurizer tunnel is employed to heat cold bottles from 2/3 to a temperature of 28-30 degrees. It additionally heats them to 60 degrees. Then cools them all the way down to sixty degrees for thirty to 45 minutes.
BOTTLE WARMING TUNNEL TECHNICAL DETAIL:-
|
PROCESS TIME |
7 Min. |
|
MIN TEMP OF BEV INLET |
6 Degrees |
|
MAX TEMP. OF BEV OUTLET |
30 degrees in the core of the bottle. |
|
CHAIN |
114” Wide Raised rib Thermoplastic System Plast Make |
|
CONVEYOR |
3 Track slat chain & 1 row DTSC at infeed & Outfeed |
|
TRANSFER SYSTEM |
Self Clearing DTSC at Infeed & Outfeed with drive |
|
WATER CONSUMPTION |
There is no water consumption during running. Due to Evaporation very low quantity for make up at 35 Degrees. |
|
AIR CONSUMPTION |
1 cfm at 6 bar |
|
LEVEL CONTROL |
Magnetic float switch for level control & pump safety. |
|
AIR KNIFE |
High Volume Air Blower across discharge Conveyor |
|
SPRAY NOZZLES |
Full cone quick release Spray Nozzles, |
|
INTERLOCKING |
Interlocking with audio visual alarms at discharge. |
|
FABRIACATION |
The complete fabrication is done using TIG welding |
|
TANK ACCESS |
All tanks are provided with manholes of 425 mm x 325 mm |
|
|
|